Hunter Panels Tapered Polyiso Product Overview

Move mouse cursor over product for information.

Hunter Tapered H-Shield

Tapered H-Shield
Tapered H-Shield
Sloped Polyisocyanurate Insulation
  • Available in two grades of compressive strengths per ASTM C 1289 Type II, Class 1 Grade 2 (20 psi) or Grade 3 (25 psi)
  • Available slopes are 1⁄16" (2mm), 1⁄8" (3mm), 3⁄16" (5mm), 1⁄4" (6mm), 3⁄8" (10mm) and 1⁄2" (13mm) per foot
  • Available in 4'x4' (1220mm x 1220mm) and 4'x8' (1220mm x 2440mm) panels in thicknesses of .5" (13mm) minimum to 4.5" (114mm) maximum in a single layer
  • Other panel sizes and facers are available upon special request
  • Hunter Tapered H-Shield CG

    Tapered H-Shield CG
    Tapered H-Shield CG
    Sloped Polyisocyanurate Insulation
  • Available in two grades of compressive strengths per ASTM C 1289 Type II, Class 1 Grade 2 (20 psi) or Grade 3 (25 psi)
  • Available slopes are 1⁄16" (2mm), 1⁄8" (3mm), 3⁄16" (5mm), 1⁄4" (6mm), 3⁄8" (10mm) and 1⁄2" (13mm) per foot
  • Available in 4'x4' (1220mm x 1220mm) and 4'x8' (1220mm x 2440mm) panels in thicknesses of .5" (13mm) minimum to 4.5" (114mm) maximum in a single layer
  • Other panel sizes and facers are available upon special request
  • Hunter Hinged Target Sump

    Hinged Target Sump
    Hinged Target® Sump
    8’ x 8’ Hinged Drain Sump Reduces Field Labor
  • One Piece 8'x8' Panel, folds to 4'x8'
  • Pre-Cut — Ready to Install
  • Completely Eliminates Waste
  • A variety of thicknesses and slopes to accommodate specific job conditions
  • Flexible starts at the drain .5" 1", 1.5", or 2"
  • FM Class 1 Assemblies – 1.5" starts are available
  • Manufactured with Tapered H-Shield and Tapered H-Shield CG, 20 or 25 psi
  • Hunter Pre-cut Tapered Hips and Valleys

    Hinged Target Sump
    Pre-cut Tapered Hips and Valleys
  • Shipped ready to install – no field cuts required
  • No waste, reducing material removal fees on job site
  • Individually packaged and labeled
  • Flexibility in design and size: custom designed to meet your job site requirements including slope, minimum and maximum thicknesses. All panels AA-ZZ
  • Available in all slopes
  • Manufactured with Tapered H-Shield and Tapered H-Shield CG
  • Search HunterPanels.com

    Hunter Tweets

    Inner Circle


    Hunter Panels   15 Franklin Street   
Portland, Maine 04101   USA

    Website Feedback